 |
"BIAX" COPPER BONDED EARTH RODS are manufactured
from 99.9% pure electrolytic copper molecularly bonded onto a steel
core in accordance with national and international standards. There
is no metal interface, so dissimilar metal reaction cannot occur
and the copper be separated from the steel.
The core is of low carbon steel of grade 080A20 of BS970 and has
high tensile strength of 600 N/mm2. The copper covering
is maintained at the root of the thread as, the threads are rolled
onto the rod which ensures that an even copper covering is maintained.
Rolled threads also give strength greater than cut threads.
| Cat No. |
Diameter in mm |
Thread Dia 'X' |
Shank Dia 'Y' |
| BCBR9512 |
9.5 X 1200 |
- |
9.5 |
| BCBR1612 |
16 X 1200 |
5/8" |
14.2 |
| BCBR1615 |
16 X 1500 |
5/8" |
14.2 |
| BCBR1618 |
16 X 1800 |
5/8" |
14.2 |
| BCBR1624 |
16 X 2400 |
5/8" |
14.2 |
| BCBR1630 |
16 X 3000 |
5/8" |
14.2 |
| BCBR2012 |
20 X 1200 |
3/4" |
17.2 |
| BCBR2015 |
20 X 1500 |
3/4" |
17.2 |
| BCBR2018 |
20 X 1800 |
3/4" |
17.2 |
| BCBR2024 |
20 X 2400 |
3/4" |
17.2 |
| BCBR2030 |
20 X 3000 |
3/4" |
17.2 |
|
| |
 |
"BIAX" EARTHING CLAMPS
High copper content alloy body (Gunmetal), having
Phosphor Bronze or Brass screw. Corrossion resistant. A good electrical
contact ensured as the strength of the screw enables it to be fully
tightened. |
| |
 |
"BIAX" COUPLING
Coupling is highly corrossion resistant and high
strength. High copper alloy coupling (Brass or Phosphor Bronze)
counter bored to completely enclose threads, protecting them from
damage and corrossion. Rod to rod or Rod to driving stud contact
can be achieved ensuring that the driving force is directly applied.
The coupling is strong enough to transfer the force whilst maintaining
good electrical contact, even if loosening occurs during driving. |
| |
 |
"BIAX" DRIVING STUD
High strength steel driving head can be used many
times over, and is suitable for use with power hammers. |
